山東銷售斯米克S221錫黃銅焊絲氣保焊絲

斯米克S221錫黃銅焊絲氣保焊絲 Category

　　類 別

　　Trade

　　mark

　　牌 號

　　Chemical composition

　　主要成份(%)

　　Characteristics & application

　　特性和用途

　　Equivalent to AWS

　　相當AWS

　　Copper

　　alloys

　　銅

　　合

　　金

　　S 201

　　Sn1 Si0.3Mn0.3

　　Cu Rem.

　　Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.

　　機械性能好，抗裂性好。紫銅氣焊及氬弧焊用

　　ERCu

　　S 211

　　Si3 Mn1

　　Cu Rem.

　　Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.

　　機械性能好，銅合金氬弧焊及鋼的MIG釬焊用

　　ERCuSi-Al

　　S 212

　　Sn5 Cu Rem.

　　Wear resistance. Argon arc welding of copper alloys and surfacing of steel.

　　耐磨性好。銅合金氬弧焊及鋼的堆焊用

　　ERCuSn-A

　　S 213

　　Sn8 Cu Rem.

　　Wear resistance. Argon arc welding of copper alloys and surfacing of steel.

　　耐磨性好。銅合金氬弧焊及鋼的堆焊用

　　ERCuSn-C

　　S 214

　　Al7.5 Cu Rem.

　　Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.

　　耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用

　　ERCuAl-A1

　　S 215

　　Al9 Cu Rem.

　　Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.

　　耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用

　　ERCuAl-A2

　　S 221

　　Cu60 Sn1 Si0.3

　　Zn Rem.

　　Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.

　　熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵

　　S 221F

　　Cu60 Sn1 Si 0.3

　　Zn Rem.

　　S221 welding rod coated with flux.

　　外涂焊劑的S221焊絲

　　S 222

　　Cu58Sn0.9Si0.1

　　Fe0.8 Zn Rem.

　　Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.

　　熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵

　　RBCuZn-C

　　S 222F

　　Cu58Sn0.9Si0.1

　　Fe0.8 Zn Rem.

　　S222 welding rod coated with flux.

　　外涂焊劑的S222焊絲

　　RBCuZn-C

　　S 223

　　Cu59 Sn0.6

　　Zn Rem.

　　Melting point is about 900℃. Braze welding of copper, steel and cast iron.

　　熔點約900℃。銅、鋼、鑄鐵釬焊用

　　RBCuZn-A

　　S 224

　　Cu62 Si0.5

　　Zn Rem.

　　Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.

　　熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵

　　Copper

　　alloys

　　銅

　　合

　　金

　　S 225

　　Cu48 Ni10

　　Zn Rem.

　　Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.

　　熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用

　　RBCuZn-D

　　S 225F

　　Cu48 Ni10

　　Zn Rem.

　　S225 welding rod coated with flux.

　　外涂焊劑的S225焊絲

　　RBCuZn-D

　　S 226

　　Cu60 Sn0.3

　　Si0.2 Zn Rem.

　　Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.

　　熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵

　　S 227

　　Cu58Sn0.9Ni0.5

　　Si0.1 Fe0.8

　　Zn Rem.

　　Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.

　　熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵

　　RBCuZn-B

　　S 229

　　Cu55 Ni6 Mn4

　　Zn余

　　Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.

　　熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用